　 55th Annual Symposium of the Vacuum Society of Japan　 Japanese

　　　　　　　　　　　　　　　　November 18-20, 2014

We cordially invite you to participate in the 55th Annual Symposium of the Vacuum Society of Japan (ASVSJ-55), which will be held in Osaka during November 18-20, 2014. The conference includes a special symposium with invited speakers, and an exhibittion of the latest equipment at the conference site. For abstract submission and proceeding manuscript preparation, please refer to the details given in the menu below. We are looking forward to your contribution to the conference.

　　　　 2014/11/18-20
　　　　

Osaka Prefecture University (Osaka) I-site Nanba
　
　　

[ Detail ]

セキュリティ保護のため閲覧制限されている場合はブラウザの上に出たオプション表示バーをクリックしてください

　ASVSJ-55

Detail　 Registration　 Abstract Proceedings　 Guide for Presenters　 Program(Japanese)

　 ●Date 　 ●Venue 　 ●Plenary Session 　 ●Topical Session 　 ●Invited speakers 　 ●Topics 　 ●Submission 　 ●Acceptance notice 　 ●Fee 　 ●Exhibition/Presentation by Manufacturers 　 ●Informal meeting 　 ●Child-care Program 　 ●Proceedings 　 ●Committees 　 ●Sponsers 　 ●Important Dates 　 ●Contact

Date

18-20/Nov/2014

Venue

I-site Nanba（Osaka）

Plenary Session

HIRUMA, Akira (Hamamatsu Photonics K.K., President and CEO)
"The Challenge to Light"

Topical Session (planned)

"The Cutting-edge Utilization Technologies of the Elementary Particles, Muon and Positron, Produced by Giant Accelerators: Elementary Particle Microscope"

MIYAKE Yasuhiro (High Energy Accelerator Research Organization(KEK))
"Muon Science Advanced in J-PARC MUSE (Japan Proton Accelerator Research Complex, MUon Science Establishment)"
TORIKAI, Eiko (Yamanashi University)
"Frontier of Materials, Life and Elementary Particles Science explored by Ultra Slow Muon Microscope"
SUGIYAMA, Jun (Toyota Central Research & Development Laboratories Inc.)
"Characterization of Industrial-Materials by Use of the Muon"
UEDONO, Akira (University of Tsukuba)
"Materials Evaluation by Use of the Positron Beam"

Invited speakers (planned)

Vacuum Science and Technology (VST)
　TERAOKA, Yuden (Japan Atomic Energy Agency)
　　　Chemical Reaction Process Study on Material Surfaces with Hyperthermal Molecular Beams
Surface Engineering (SE)
　TANAKA, Satoru (Kyushu University)
　　　Heteroepitaxy by the Nano-Surface-Structural Control
Surface Science (SS)
　KANO, Jun (Okayama University)
　　　Catalyst Actions at interface between metallic and ferroelectric materials
Applied Surface Science (ASS)
　FUKUMA, Takeshi (Kanazawa University)
　　　Biomolecule Imaging in Liquid by Frequency Modulation Atomic Force Microscopy (FM-AFM)
Thin Films (TF)
　JITSUNO Takahisa (Osaka University)
　　　Research and Development on Highly-Durable Optical Thin Films for LASER applications
Plasma Science /Technique (PST)
　GOTOH Yasuhito (Kyoto University)
　　　Production and Transport of High-Current and Low-Energy Ion Beam, and their Applied Technology
Nanometer structures (NS)
　TAKENAKA Hisataka (Toyama )
　　　Nanofabrication Technology for Development on Multilayer X-ray Optical Devices
Electronic Materials & Processing (EMP)
　TADAMOTO, Kazuyuki (Yamaguchi University)
　　　Hydride Vapor Phase Epitaxy on Semipolar GaN Substrates and its LED applications
Computational Materials Science (Current Topics: CP)
　TSUNEYUKI, Shinji (University of Tokyo)
　　　Turning the Headwaters of Basic Science into a Torrent of Innovations in Functional Materials and Energy Conversion: K computer and its tomorrow

Topics

Topical sessions for contributed papers.
Contributed presentation：15 min (including 5 min for discussion); Equipment: LCD projector

Sessions

Vacuum Science and Technology
Pumping, Pressure Measurements, Materials for Vacuum Systems, Fluid Mechanics, Gas Dynamics, Contamination, Applications
Surface Engineering
Purification, Processing and Finishing of Metals, Sputtering Targets, Coatings, Sintering, Tribology, MEMS
Surface Science
Surface Physics and Chemistry, Surface and Interface Characterization, Surface Dynamics, Catalysis
Applied Surface Science
Surface Finishing and Modification, Experimental Techniques, Surface Spectroscopies
Thin Films
Properties, Deposition Techniques, Self-Assembly, Applications
Plasma Science /Technique
Diagnostics, Plasma Sources, Plasma Processes, Ion Beam Technologies
Nanometer structures
Clusters, CNT, Electron Sources, Graphene, Nanoparticles, Nanofabrication, Nanoscale Devices, SPM, Quantum Structures
Electronic Materials & Processing
Semiconductor Devices, Electronics Devices, CVD Processes, Etching Processes, High-K Dielectrics, Bio- and Molecular Electronics
Others
Biotechnology,Tribology, Space Technologies, etc.

Poster presentations

Please choose "Poster presentation" upon submission.
The posters presented by young researchers will be nominated as candidates for poster awards.

Submission

Electronic submission only. The submission form can be accessed from the Registration Page of this website.
Registration Deadline： 1 August 2014 24:00 JST.

The abstract of the paper should be sent in electronic form (PDF format) only. It should be written within a single A4 page, and be sent via e-mail. All received manuscripts will be compiled into a book form and are distributed to the conference attendants.
Abstract Deadline： 18 September 2014 24:00 JST
The manuscripts must be submitted in PDF format as an attachment according to the instructions in the Abstract Menu.

Acceptance notice

The authors will be notified of their program numbers by the end of August via e-mail. Poster presentation details will also be sent at this time to the corresponding author.

Fee

Student members of VSJ
2,000JPY
Regular and corporate members of VSJ or supporting societies
4,000JPY
Others
5,000JPY
Booklet of Abstract
2,500JPY
To attend the Symposium, a student has to be registered as a VSJ member before the end of Sept. 2012; otherwise the fee for regular member will be applied for the attendance to Symposium. Without subscription of the monthly Journal, the annual charge for Student member (4,000 JPY per year) can be reduced to 2,000 JPY.

Exhibition/Presentation by Manufacturers

During the meeting, a session of Exhibitions/Presentations by Manufacturers will be held at the adjacent hall. Companies with relations to vacuum science and technologies are strongly encouraged to attend the session (Refer to invitation for detail).

Informal Meeting

An Informal Meeting will be held on 19 November 2014. Details will be announced on this website.

Child-care Program

We offer financial assistance for the charge for child-care, in case the attendant extends day-care service of children under the age of elementary school. Check 'Child-care' in the Registration form.

Proceedings

The symposium proceedings will be published in the "Journal of the Vacuum Society of Japan" . Please consult the Proceedings menu for details on the submission procedure and instructions for the preparation of manuscripts. Please submit your manuscript via the submission site of JSTAGE3.

Committees

Chair　　　： KASAI Hideaki（Osaka Univ.）
Vice Chair　　： SASAKAWA Kaoru（KOBELCO RESERCH INSTITUTE,Inc.），NAKAMURA Ken（AIST）
Program　： Chair KAWAKAMI Youichi（Kyoto Univ.）
YOSHIMURA Takeshi（Osaka Prefecture Univ.）, UMEZAWA Kenji（Osaka Prefecture University），IKARI Tomonori（Ube National College of Technology），TAKAHASHI Kazuo（Kyoto Institute of Technology）, OKADA Michio（Osaka Univ.），TAMURA Shigeharu（AIST），MIURA Yoshio（Kyoto Institute of Technology），NAKANISHI Hiroshi（Osaka Univ.），NAITOH Yoshitaka（Osaka Univ.）
Site of oral session： Chair SUSUKI Yasufumi(Osaka Kyoiku University)
ISHIKAWA Fumitaro（Ehime Univ.），YOSHII Kenji（JAEA），OKAMOTO Akio（TRI-Osaka），ISU Toshiro（The University of Tokushima），NAITOH Masamichi（Kyushu Institute of Technology）
Site of poster session： Chair HAYASHI Tsukasa（Nissin Electric Co.,Ltd.）
GOTOH Yasuhito（Kyoto Univ.），MATSUNAGA Takashi（TRI-Osaka）, SASAKAWA Kaoru（KOBELCO RESERCH INSTITUTE,Inc.）
Exhibit　　： Chair KAWANISHI Noriyuki（CANON ANELVA CORPORATION）
FUKASAWA Hiroyuki（ULVAC,Inc.）, ASANO Kiyoshi（CANON ANELVA CORPORATION），MURACHI Shigetsugu（SHINKO SEIKI Co.,Ltd），MARANAKA Masao（ShinMaywa Industries）, OGURA Shinji（Ayumi Industries Co.,Ltd），NIIBE Masahito（University of Hyogo），AMANO Junichi（Osaka Vacuum,Ltd.）
Publicity　　　： Chair FUJII Yoshikazu (Kobe Univ.)
Secretary　　　： Chair NAKANISHI Hiroshi (Osaka Univ.)

Party　　　： Chair YOKOTA Masami (SHIMADZU CORPORATION)
TOMOMURA Yoshitaka (SHARP CORPORATION)，NAKAJIMA Kaoru (Kyoto Univ.)
Observers： SASAKI Masahiro (University of Tsukuba), KIMURA (Kenji Kyoto Univ.), YASUE Tsuneo (Osaka Electro-Communication University)，MUROI Hironobu（Osaka Vacuum,Ltd.）

Sponsors

Sponsoring Society

The Vacuum Society of Japan (VSJ)

Supporting Societies

The Institute of Image Information and Television Engineers (ITE), The Japan Society of Applied Physics (JSAP), The Society of Chemical Engineers, Japan (SCEJ),The Society for Atomic Collision Research, Catalysis Society of Japan, Cryogenic Association of Japan, The Institute of Electrical Engineers of Japan (IEEJ), The Institute of Electronics, Information and Communication Engineers, The Chemical Society of Japan (CSJ)， Particle Accelerator Society of Japan, The Japan Society of Mechanical Engineers, The Japan Institute of Metals (JIM), The Japanese Society of Microscopy, Atomic Energy Society of Japan, The Society of Materials Science, Japan (JSMS), The mass Spectrometry Society of Japan, Japan Vacuum Industry Association(JVIA), Japan Titanium Society, The Iron and Steel Institute of Japan, Semiconductor Equipment Association of Japan(SEAJ), The Surface Science Society of Japan, The Physical Society of Japan (JPS), The Japan Society for Analytical Chemistry (JSAC), The Japanese Society for Synchrotron Radiation Research, The Surface finishing Society of Japan, Japan Society of Corrosion Engineering, The Japan of Plasma Science and Nuclear Fusion Research

Important Dates

Registration Dead line: 24 July 2014
Notification of Submission: the end of August
Deadline of Abstract Submission：18 September 2014, 24:00 (JST)
Deadline of Proceedings submission：17 November 2014, 24:00 (JST)
Registration of Exhibition/Presentation by Manufacturers: ---

Guide for authors of Abstracts

1．Abstract

Authors of ASVSJ-55 are requested to submit an abstract in the PDF format, which will be compiled and distributed to conference attendees. Please read this instruction carefully and prepare your abstract.You can also refer to the abstract sample（Jpanese PDF, Japanese MSWord, English PDF or English MSword） Please note that only electronic submission in PDF format is accepted.

2．Manuscript format

Typeset the manuscript according to the following instructions．

【Size】
A4 (portrait), 1 page
【Margins】
Please set margins: head 22 mm, foot 25 mm, left/right 20 mm.
【Title】
Put the title at the first line, centering, with 14~16 pt font. Leave a space at least 30 mm width at the left of the title, where the program number will be inserted by the symposium committee.
【Authors and Affiliations】
　List under the title, centering, with 11 pt font. Put a "°" mark before the name of the presenting author.
【Body】
Number of the lines in a page should be 40~45. Both single and double column formats are acceptable. In the case of double column format, put a space of 8 mm between the columns.

3．Figures, Tables and Photos

Figures, tables and photos must be arranged within the page. Note: images provided in color will go poor in the abstract book, because the book will be printed in black and white. The author is responsible for the quality.

4．Manuscript submission

The manuscripts must be submitted in PDF format as an attachment at the following e-mail address. The file name should be "123.pdf" where `123' has to be replaced by your Program Number .
【Title of e-mail】 ASVSJ-53 Abstract: program number
【Address】ofc-vsj@vacuum-jp.org

5．Submission Deadline

18 September 2014, 24:00 (JST)

6．Note
If PDF file cannot be prepared properly, send a printed manuscript via postal mail by 14 September 2012 to the VSJ office:
　The Vacuum Society of Japan, 306 Kikai-Shinko-Kaikan Bldg, Shibakoen 3-5-8, Minato-Ku Tokyo 105-0011, Japan
　Tel：03-3431-4395

Guide for Presenters

Every contributed oral presentation will last 15 minutes including discussion.

Please bring your own laptop PC and connect it to the LCD projector during a coffee break prior to the session in which your presentation is assigned. The connector is a mini D-sub 15 pin. Please bring a converter if your laptop PC does not correspond to it. You are asked to bring a backup file in a USB memory for safety.

Poster Presentation

If you want to make your presentation as a poster, please check
`poster session' in the registration form. Good presentations of young VSJ members will be nominated to Award.

Guide for authors of Proceedings

The symposium proceedings will be published as "Journal of the Vacuum Society of Japan" .

Contributed papers are published as Letters. A Letter should be limited to 2,500 words including an abstract in English (3 printed pages).
Invited papers are published as Letters or Reviews. A Review should be limited to 6,400 words including an abstract in English (8 printed pages).
Authors are expected to read the ''Information for the Contributors'' and follow "Instructions for the Preparation of Manuscripts" available at the web site at http://www.vacuum-jp.org/EDT/edthome.html.
Manuscripts should be prepared using a prescribed template in a MS-Word format (or English Edition). Authors are recommended also to access the web site of the Vacuum Society of Japan (VSJ).
Please submit your manuscript at the new submission site JSTAGE3.
The dead line is 17 November 2014, 24:00 (JST).
The program numbers should be given on submission.
Submitted manuscripts are sent to a referee. The editorial board decides acceptance in the light of the opinion of the referee. The authors are required to nominate some referees on submission.

Registration

Click Here !　↓

Contact Address

The Vacuum Society of Japan
e-mail: ofc-vsj@vacuum-jp.org
TEL：03-3431-4395、FAX：03-3433-5371

▲Top

Chair　　　：	KASAI Hideaki（Osaka Univ.）
Vice Chair　　：	SASAKAWA Kaoru（KOBELCO RESERCH INSTITUTE,Inc.），NAKAMURA Ken（AIST）
Program　：	Chair KAWAKAMI Youichi（Kyoto Univ.） YOSHIMURA Takeshi（Osaka Prefecture Univ.）, UMEZAWA Kenji（Osaka Prefecture University），IKARI Tomonori（Ube National College of Technology），TAKAHASHI Kazuo（Kyoto Institute of Technology）, OKADA Michio（Osaka Univ.），TAMURA Shigeharu（AIST），MIURA Yoshio（Kyoto Institute of Technology），NAKANISHI Hiroshi（Osaka Univ.），NAITOH Yoshitaka（Osaka Univ.）
Site of oral session：	Chair SUSUKI Yasufumi(Osaka Kyoiku University) ISHIKAWA Fumitaro（Ehime Univ.），YOSHII Kenji（JAEA），OKAMOTO Akio（TRI-Osaka），ISU Toshiro（The University of Tokushima），NAITOH Masamichi（Kyushu Institute of Technology）
Site of poster session：	Chair HAYASHI Tsukasa（Nissin Electric Co.,Ltd.） GOTOH Yasuhito（Kyoto Univ.），MATSUNAGA Takashi（TRI-Osaka）, SASAKAWA Kaoru（KOBELCO RESERCH INSTITUTE,Inc.）
Exhibit　　：	Chair KAWANISHI Noriyuki（CANON ANELVA CORPORATION） FUKASAWA Hiroyuki（ULVAC,Inc.）, ASANO Kiyoshi（CANON ANELVA CORPORATION），MURACHI Shigetsugu（SHINKO SEIKI Co.,Ltd），MARANAKA Masao（ShinMaywa Industries）, OGURA Shinji（Ayumi Industries Co.,Ltd），NIIBE Masahito（University of Hyogo），AMANO Junichi（Osaka Vacuum,Ltd.）
Publicity　　　：	Chair FUJII Yoshikazu (Kobe Univ.)
Secretary　　　：	Chair NAKANISHI Hiroshi (Osaka Univ.)
Party　　　：	Chair YOKOTA Masami (SHIMADZU CORPORATION) TOMOMURA Yoshitaka (SHARP CORPORATION)，NAKAJIMA Kaoru (Kyoto Univ.)
Observers：	SASAKI Masahiro (University of Tsukuba), KIMURA (Kenji Kyoto Univ.), YASUE Tsuneo (Osaka Electro-Communication University)，MUROI Hironobu（Osaka Vacuum,Ltd.）

55th Annual Symposium of the Vacuum Society of Japan Japanese

November 18-20, 2014

Date

Venue

Plenary Session

Topical Session (planned)

Invited speakers (planned)

Vacuum Science and Technology (VST)

Surface Engineering (SE)

Surface Science (SS)

Applied Surface Science (ASS)

Thin Films (TF)

Plasma Science /Technique (PST)

Nanometer structures (NS)

Electronic Materials & Processing (EMP)

Computational Materials Science (Current Topics: CP)

Topics

Sessions

Poster presentations

Submission

Acceptance notice

Fee

Exhibition/Presentation by Manufacturers

Informal Meeting

Child-care Program

Proceedings

Committees

Sponsors

Sponsoring Society

Supporting Societies

Important Dates

Guide for authors of Abstracts

1．Abstract

2．Manuscript format

3．Figures, Tables and Photos

4．Manuscript submission

5．Submission Deadline

6．Note

Guide for Presenters

Poster Presentation

Guide for authors of Proceedings

Registration

Click Here ! ↓

Contact Address

　 55th Annual Symposium of the Vacuum Society of Japan　 Japanese

　　　　　　　　　　　　　　　　November 18-20, 2014

Click Here !　↓